220 V AC 50/60 Hz Operating Voltage, built-in mains filter for EMI.
Motor direction control load capacity is 220V AC 10 A.
Trimpot for motor on / off and auto off time setting.
There is a jumper to activate / deactivate the auto off mode.
Detecting door closed status with Limit Switch
Object detection with safety photocell
Receiver, Sensor etc. 24 V AC and 12 V DC outputs to supply the units
Warning output while engine is running (Siren, Flasher)
Indicator LEDs for engine operation and switch states
All entrances are isolated separately.
It has 220 V AC mains line filter, so motor control and operation is longer lasting.
MEGORAS brand ADC102F3 is a control card that can be used in all three-phase automatic door systems with 380 V, regardless of the brand model.
In cases where the motor needs to be controlled without adjusting the speed, take-off or closing settings; it is used for control units used in PVC door systems, for example.
ADC102F3 Control panel provides complete control with external control input, open with loop sensor, control with wireless or rope switch, safety photocell detection, automatic shutdown time, motor operating time and limit switches.
Thanks to the illuminated buzzer on the control panel, the door movement moment is warned audibly and visually without the need for an external flasher. The safety sensor is only activated in the closing state, and the commands for opening and closing the door can also be given separately in the control section.